Detailed design and quantity/cost
estimates
Based on the collected information and
results of the discussions mentioned above the consultants shall design the
building, following the standard codes of practice, norms and guidelines. The
relevant codes of IS for the design of Nepal National Building Code (NBC-1994),
Municipality Norms, Rule and Regulation shall be followed. The list of all
reference literature and materials shall be provided on the report. As mentioned earlier, the
design will, to the extent possible, be guided by environmental and climatic
factors and reflect state of the art practice in environmental consideration.
The consultants shall produce detailed design and all structural drawing as per
Municipality Norms, Rule and Regulation and preparation of all documents need
for Kathmandu Metropolitan City Office, consultants shall take certificate for
further procedure with the help of DHM.
The consultants shall produce detailed
quantity estimate of the building and its accessories including provisions of
demolition of existing DHM office buildings. The consultants shall collect
information on sources of materials and their lead distances and prepare rate
schedules and cost estimates based on the standard norms and prevailing
district rates.
The Consultants shall:-
i) Prepare detailed design and drawings for:
a.
Architectural
b.
Structural
c.
Mechanical
d.
Electrical
and Allied system
e.
Communication
and Computer Networking
f.
Fire
Alarm and Fire fighting system
g.
CCTV
system
h.
AC
system
i.
Water
Supply and Sanitation (Sewerage, Drainageetc)
j.
Environmental
enhancement and protection measures
k.
Interior
detail
l.
Detailed
list of furniture and equipment for the project
m.
Site
Development Works
i)
Prepare
Technical Specifications and cost estimate
ii)
Prepare
Municipality Drawings and assist Employer for its approval
iii)
Prepare
Bill of quantities for each building
iv) Any other
document necessary for the bidding process & construction permit.
Note:
• Drawings should include Design /
Working drawings
• The Consultant shall conduct soil test on the site
to determine its bearing capacities prior to carrying out the structural design
of the project.
The consultant
should present three dimensional animation of building to DHM
Deliverable shall include:-
a)
detailed design and Tender Drawings
b)
Municipality Drawings
c)
Detailed Cost Estimates, Work Specifications
d)
Complete set of Tender Documents
0 Reviews:
Post Your Review